Make some adjustments to keep the glasses from slipping off

Always have to push back the glasses that slip off? Maybe it’s time to make some adjustments so fake Oakleys glasses don’t slip anymore. If you’re in a hurry, there are many quick fixes you can try at home to temporarily hold the glasses in place. For a more permanent solution, you may have to adjust the frames so that they fit better on your head and won’t slip through the day.

Repair knockoff Oakley glasses at home

Wash your face clean to remove natural oils. Oily skin can cause glasses to slip off your nose. The most effective way is to use natural skin care products that can remove oil and wash your face 1-2 times a day. Apply the cleanser to your skin, then rinse off thoroughly and put on your glasses to see if it still slips.

Your body may produce more oil at the end of the day, so keep cleaning wipes handy so you can wipe off excess oil at any time.

Frequent use of cleansers to remove oil may dry out the skin.

Wrap the hair rope around the temples to increase the friction. Prepare two hair ropes that match the color of the frame so they fit perfectly into the temples without being too obtrusive. Slide one of the hair ropes into the third of the temples, stopping to make a full circle. Pull the hair rope taut and thread it through the temples again. Continue looping a few times until the hair rope is snug against the temples, then repeat on the other side.

Try to keep the hair rope flat against the temples to avoid discomfort.

Try various thicknesses of hair rope to see which one fits best on the temple and is most comfortable to wear.

Apply wax to the center beam of your glasses to keep it from slipping. Glasses anti-slip wax comes in a lip balm-like tube that provides friction between the frame and the nose. Open the cap and apply a small amount of wax to the middle beam of the glasses. Put on your glasses and see if they still slip off easily. If it still slips, apply more wax.

You can buy glasses anti-slip wax online or at your local pharmacy.

WARNING: Glasses must fit snugly against the head for the anti-slip wax to work best. Go to an optical store or find an optometrist and have them measure your face to determine the right frame size for you.

Put heat shrink on the temples to make them tighter. When the heat shrink tube is heated, it shrinks according to the size of the attached item. Put the heat-shrink tubing around the temples on both sides and slide it up to fit snugly against your ears. Hold up the heat gun, set it to low temperature, and blow the heat shrink tube from a distance of 10-13 cm for 30 seconds to make it shrink.

You can buy heat shrink tubing at your local hardware store. Choose heat shrink tubing that matches the color and frame so it doesn’t look too obtrusive.

If you don’t have a heat gun, you can use a hair dryer set to the highest heat.

The heat gun should not be held against the glasses for too long or the frame will be damaged or melted.

Some frames have rubber strips on the temples that increase grip.

Adjust the frame

If your glasses keep slipping off your nose, consider changing the nose pads. Using the small screwdriver included in the eyeglass repair kit, loosen the screw on the nose pad and remove it. Pull out the old nose pads and replace them with new ones. Tighten the screws and repeat on the other side.

You can buy replacement nose pads of fake Oakley sunglasses online or at optical stores.

Optometrists can also change your nose pads for a small fee.

Tip: If your frame doesn’t have nose pads, you can buy non-slip pads to stick on the center bridge to keep your glasses in place.

Optical Fake Oakley Glasses Realize a New Comfort Concept

Fake Oakleys-new comfort concept originated from a large number of research and consumer surveys on optical glasses within the group. I proposed that long-term wearers of replica Oakley glasses should pay attention to the following three aspects of comfort:

Fake Oakleys
Fake Oakleys

Wearing comfort

This point is given priority in the design of optical knockoff Oakley glasses. The content covers the measurement of the key dimensions of the frame. The relevant parts of the face to ensure that the optical glasses fit the facial features to the greatest extent. When buying optical glasses, you need to pay close attention to the data on the inside of the frame. This meets the international unified standards to choose the frame size that suits your facial features.

At the same time, the raw materials used in optical glasses will also affect the long-term wearing comfort. Usually, the commonly used materials for producing high quality fake Oakley glasses are metal and plate. Due to their different natural properties, the raw materials have their own characteristics in terms of weight, flexibility, adjustability and anti-allergic properties. Consumers can choose suitable frame materials according to their needs and characteristics.

The natural attributes of the frame are the basis for wearing comfort. And the comfort of the field of view is another important consideration. For different vision problems, Luxottica reminds consumers to choose the appropriate optical frame shape and material, which greatly affects the wearing comfort.

Psychological comfort

For a long time, optical glasses wearers have left a deep impression in people’s minds of being smart, diligent, and honest, thus forming a fixed impression. When people wear glasses, they will also subconsciously suggest themselves, making their behavior closer to The description of the impression. So far, the development of optical glasses has evolved from simple vision correction tools to fashion accessories, which more and more carry people’s psychological needs for the pursuit of personal style and individuality.

Style comfort

With the continuous innovation, research and development of optical glasses in appearance and materials, as well as the cooperation with international fashion designers. Glasses have now become a veritable accessory that demonstrates the personality and taste of the wearer, not just Tools for correcting vision. As the world’s leading optical glasses manufacturer, Luxottica Group has been leading the latest fashion trend of optical glasses. They provide consumers with unique designs.

knockoff Oakleys
knockoff Oakleys

Last year, Luxottica took the lead in proposing the concept of “Asian Customization”, aiming at the different characteristics of Asian and European faces, using key factors such as face shape, facial features, and head shape to improve classic products to make Asians wear more comfortable. This move caused widespread response in the industry. And successively launched frames that conform to the Asian face, which promoted the development of the entire optical industry-knockoff Oakleys in China.